Concrete Engineering And Technology Course And Certification

What is Concrete Engineering and Technology?

Concrete Engineering and Technology is the application of various mechanisms and technology to concrete mixing in order to enhance the process of concrete material mixing in civil engineering. 

Concrete is a compound material that is made up of fine and coarse mixture of aggregates that are bonded together with a fluid cement (or cement paste) that gets hardened over time, popularly, in the past a lime-based binder dor cement binder, such as Lime Putty, but sometimes with other water-powered cement, such as a Calcium Aluminate Cement or with the Portland Cement to develop Portland Cement concrete (it was named such because of its visual resemblance to the Portland stone).

Many other non-cementitious types of concrete exist with several other methods of binding Concrete together, this includes: Asphalt Concrete together with a binder for Bitumen, which is commonly used for coating road surfaces, and polymer concretes that makes use of polymers as a binder. 

When the Concrete is mixed together with dry Portland cement and water, the mixture then forms a slurry fluid that is easily poured and molded into any shape. The cement then reacts with the water and other ingredients to develop a hard matrix that bonds together the material into a durable stone-like material that has many uses.

Most times, various additives such as Superplasticizers or Pozzolans are added together in the mixture to enhance the physical properties of the wet mixture or the finished material. Most concrete is poured out with re-enforced materials such as rebar that are embedded to give the material tensile strength, therefore producing a reinforced concrete.

Features of Concrete Engineering: 

There are many features of Concrete and some of them are:

1. Grades (M20, M25, M30, etc.)

2. Compressive strength of the total mixture.

3. Characteristic Strength of material.

4. Tensile strength.

5. Durability.

6. Creep.

7. Shrinkage.

8. Unit weight.

9. Modular Ratio.

10. Poisson’s ratio.

Benefits of Concrete Engineering and Technology: 

Concrete is so essential to our societies because it is the only material for building that cost-effectively delivers:

1. The lowest footprints of carbon for a pavement or structure over its lifecycle.

2. Unmatched durability, strength, longevity, and flexibility.

3. Maximized energy performance and efficiency via a thermal mass.

4. Durability in any environment it is used in.

5. A building material that doesn’t rust, burn, or rot.

6. Safety and security.

7. Versatility, meaning that it can be turned into any shape, color or pattern that is imaginable.

8. No off-gas.

9. Excellent vibration and sound insulating material.

10. Low cost of maintenance.

11. 100 percent reusability, also, the various materials that are needed to make concrete are plentiful in just about every area on the planet.

12. Concrete is one of the most commonly used material for building. Its usage is worldwide, ton for ton, it is twice that of wood, steel, plastics, and aluminum combined together.

13. Concrete can be cast into any desired shape. Since it is a plastic-like material in fresh state, various forms, shapes, and sizes of formworks are used to produce different shapes such as circular, rectangular, etc.

14. The constituents of concrete are sand, cement, aggregates, and water. A mixture of cement and water is called a paste. So, concrete can be called a mixture of paste, sand, and aggregates. Sometimes rocks are simply used in the place of aggregates.

In The Full Course, you will learn everything you need to know about Concrete Engineering and Technology with Certification to showcase and document your knowledge.

Concrete Engineering and Technology Course Outline:  

Concrete Eng and Tech - Concrete as a Structural Material

Concrete Eng and Tech - Cement

Concrete Eng and Tech - Normal Aggregate

Concrete Eng and Tech - Quality of Water

Concrete Eng and Tech - Fresh Concrete

Concrete Eng and Tech - Strength of Concrete

Concrete Eng and Tech - Mixing, Handling, Placing and Compacting Concrete

Concrete Eng and Tech - Admixtures

Concrete Eng and Tech - Temperature Problems in Concreting

Concrete Eng and Tech - Development of Strength

Concrete Eng and Tech - Strength Properties

Concrete Eng and Tech - Elasticity and Creep

Concrete Eng and Tech - Deformation and Cracking Independent of load

Concrete Eng and Tech - Permeability and Durability

Concrete Eng and Tech - Resistance to Freezing and Thawing

Concrete Eng and Tech - Testing

Concrete Eng and Tech - Conformity with Specifications

Concrete Eng and Tech - Lightweight Concrete

Concrete Eng and Tech - Mix Design

Concrete Eng and Tech - Special Concretes

Concrete Eng and Tech - Exams and Certification


Student Login

Login & Study At Your Pace
500+ Relevant Tech Courses
300,000+ Enrolled Students


86% Scholarship Offer!!

The Scholarship offer gives you opportunity to take our Course Programs and Certification valued at $50 USD for a reduced fee of $7 USD. - Offer Closes Soon!!

Copyrights © 2019. SIIT - Scholars International Institute of Technology. A Subsidiary of Scholars Global Tech. All Rights Reserved.